Trade fairs and markets

Hong Kong Electronics Fair 2026-2027: dates, exhibitors, Shenzhen

The Hong Kong Electronics Fair, autumn edition, runs from October 13 to 16, 2026 at the Hong Kong Convention and Exhibition Centre, at the same time as Global Sources Hong Kong, at AsiaWorld-Expo. This article covers both shows, their 2026 and 2027 dates, their exhibitor profiles, and how to extend the trip with Shenzhen and the factories of Guangdong.

Updated September 26, 2026

Which electronics shows are held in Hong Kong?

Two separate shows cover consumer electronics in Hong Kong. The HKTDC Hong Kong Electronics Fair, organized by the Hong Kong Trade Development Council, is held at the Hong Kong Convention and Exhibition Centre, in Wan Chai. Its autumn edition runs alongside electronicAsia, focused on components, and its spring edition runs alongside the HKTDC International ICT Expo and the lighting show.

The second, Global Sources Hong Kong, takes place at AsiaWorld-Expo, near the airport, on Lantau Island: a separate venue, at the other end of the territory. The show splits into two phases, consumer electronics first, then mobile electronics, smart home and lifestyle. The two shows generally overlap on the October calendar, which allows both to be visited on the same trip, provided you plan the journey between the two sites.

  • HKTDC Hong Kong Electronics Fair and electronicAsia: Wan Chai
  • Global Sources Hong Kong, two phases: AsiaWorld-Expo, Lantau Island
  • HKTDC International ICT Expo and the lighting show: run alongside the spring edition of the HKTDC Electronics Fair, at the same venue

2026 and 2027 dates: when to go

The autumn edition of the HKTDC Hong Kong Electronics Fair runs from October 13 to 16, 2026, complemented by an online matchmaking platform, Click2Match, open from October 6 to 23, 2026, and by a sourcing platform on hktdc.com active from September 13 to November 12, 2026. The spring 2027 edition is set for April 13 to 16, 2027, again at the Hong Kong Convention and Exhibition Centre, alongside, as in previous editions, the International ICT Expo and the lighting show.

Global Sources Hong Kong is held during the same October fortnight, in two phases: the consumer electronics phase from October 11 to 14, 2026, then the mobile electronics, smart home and lifestyle phase from October 18 to 21, 2026, both at AsiaWorld-Expo. The 2027 dates had not yet been published by the organizer as of September 26, 2026; the show returns each year in this same October window, which gives a forecast timeframe, without official confirmation value.

  • HKTDC Hong Kong Electronics Fair, autumn: October 13-16, 2026, Wan Chai
  • Global Sources Hong Kong, phase 1 (consumer electronics): October 11-14, 2026
  • Global Sources Hong Kong, phase 2 (mobile, smart home): October 18-21, 2026
  • HKTDC Hong Kong Electronics Fair, spring: April 13-16, 2027, Wan Chai
  • Global Sources Hong Kong 2027: dates not published as of September 26, 2026

Read next Trade shows in China 2027: full calendar by month and sector

What is the exhibitor profile?

The HKTDC Hong Kong Electronics Fair brought together, at its 2025 edition, 2,898 exhibitors from 17 countries and regions, and around 60,000 buyers from 142 countries and regions. The show organizes its halls by profile: Hall of Fame for established brands, RISE Avenue and Tech Hall for emerging uses, Startup Zone for young technology companies, RoboPark for robotics. This layout makes it easier to head straight to the hall matching your search.

Global Sources Hong Kong claims, across its recent editions, more than 2,100 Asian suppliers, more than 4,000 booths and more than 160,000 new products in phase 2. The October 2026 edition adds a dedicated pavilion for refurbished electronics, the HKICEC Global Mobile Exchange Pavilion, set up with the Hong Kong International Communications Electronic Chamber and bringing together more than sixty resellers whose phones are tested under the European WEEE directive, plus a space dedicated to Tencent's artificial intelligence ecosystem, with a summit devoted to AI agents.

The core difference lies in positioning: the HKTDC hosts established brands alongside young technology companies, while Global Sources presents itself more directly as a sourcing show with Asian manufacturers, with a strong focus on mobile electronics and smart home in phase 2.

Read next Importing electronics from China: Shenzhen, compliance, freight · Importing electronics from China: LVD, EMC, RoHS, WEEE

How do you get a visitor badge?

Registration is done online, at hktdc.com/event/hkelectronicsfairae for the HKTDC show, and at globalsources.com for Global Sources. Both shows reserve access to trade professionals: Global Sources requires a minimum age of eighteen and recommends three copies of your business card at the entrance. Free online pre-registration for a trade visitor remains standard practice for HKTDC shows; confirm the exact fee, if any, on the registration page of the edition you're attending.

  • Online pre-registration required on the official website of the show you're attending
  • Passport and business card to present on site
  • Book hotels ahead of time: both shows are held during the same October fortnight

How to extend the trip with Shenzhen and Guangdong factories

The border is crossed in a few minutes from West Kowloon station, which serves Futian directly by high-speed train: the journey takes around 15 minutes non-stop, on a schedule of around fifty trains a day between 7:01 a.m. and 11:00 p.m. Hong Kong and mainland China immigration checks are grouped together at the same departure station, which simplifies the crossing compared with a conventional border post.

On the visa side, most European travelers need no extra steps: China has extended until December 31, 2026 its unilateral visa exemption for 45 countries, including France, which allows a 30-day visa-free stay for business purposes. For a shorter trip limited to Shenzhen, a five-day visa on arrival exists for other nationalities, but it confines the trip to Shenzhen territory alone, with no access to Dongguan or Guangzhou, where a large share of Guangdong's factories are located.

In practice, a common pattern is to visit the show or shows during opening week, then cross into Futian or Luohu for two to three days of factory meetings, particularly in electronics and components, industries heavily concentrated around Shenzhen and the Huaqiangbei district. Factory meetings should be scheduled before departure: a same-day, unplanned visit often results in an incomplete reception.

  • West Kowloon-Futian journey: around 15 minutes by high-speed train
  • France and 44 other countries: 30 days visa-free, until December 31, 2026
  • 5-day visa on arrival limited to Shenzhen territory alone

Read next Verify a Chinese Factory: License, Capital, and Visit · Factory audit in China: points to check and documents to request

What mistakes to avoid when combining a show with a factory visit?

Booking a hotel at the last minute remains the first mistake: both shows are held at the same time, in an already tight hotel market, and rates rise as the date approaches. The second mistake is underestimating the journey between the two sites, Wan Chai and AsiaWorld-Expo: these are two opposite ends of the territory, to be treated as two separate days.

A third mistake concerns sourcing itself: prices quoted at a booth remain indicative, as at the Canton Fair, and do not replace verifying the Chinese company or getting a reference sample before ordering. A fourth mistake, more specific to electronics, is neglecting regulatory compliance before committing: CE marking, the low-voltage and electromagnetic compatibility directives, and restricted substances need to be checked upfront, not after the first container arrives.

Read next Negotiating with a Chinese factory: price, deadlines, terms · Golden sample: the reference sample that settles disputes

What Sorva does for you

Sorva is a trading and sourcing house based in Guangzhou and Paris. Our Chinese-speaking team shortlists the exhibitors relevant to your range before the Hong Kong shows open, schedules meetings with priority suppliers, then extends the trip with factory meetings in Guangdong, based on your entry status for mainland China.

In most cases you pay no fees: you open a file, we negotiate the goods for you, and we take a commission on their ex-works value. A factory visit in Guangdong and a regulatory compliance study for electronics can be added to the file, as can a supplier search broader than the show you attend.

What to remember

Keep in mind that the HKTDC Hong Kong Electronics Fair and Global Sources Hong Kong are held during the same October 2026 fortnight, at two separate venues, and that a high-speed train ride to Futian opens up access to Guangdong factories in fifteen minutes. First useful step: pre-register online for both shows and set your factory meetings before departure.

Let's talk

Walk the trade fair with us

Frequently asked questions

01What are the dates for the Hong Kong Electronics Fair in 2026 and 2027?
The autumn edition runs from October 13 to 16, 2026 at the Hong Kong Convention and Exhibition Centre, with an online Click2Match platform open from October 6 to 23, 2026. The next spring edition is set for April 13 to 16, 2027, at the same venue.
02What are the dates for Global Sources Hong Kong in 2027?
They had not been published by the organizer as of September 26, 2026. The 2026 edition was held in two phases at AsiaWorld-Expo, from October 11 to 14 and then from October 18 to 21; the show returns each year in this same window, a forecast marker to confirm on the official website.
03What is the difference between the HKTDC Hong Kong Electronics Fair and Global Sources Hong Kong?
The HKTDC is held in Wan Chai and brings together established brands alongside young technology companies, organized by hall. Global Sources is held at AsiaWorld-Expo and positions itself more directly as a sourcing show with Asian manufacturers, with a strong focus on mobile electronics in the second phase.
04Do you need a visa to go from Hong Kong to Shenzhen to visit a factory?
It depends on nationality. French nationals, like those of 44 other countries, benefit from a 30-day visa exemption extended until December 31, 2026 for business purposes. A five-day visa on arrival exists for other nationalities, but it limits the trip to Shenzhen territory alone, with no access to Dongguan or Guangzhou.
05How long does the journey between Hong Kong and Shenzhen take?
From West Kowloon, the high-speed train reaches Futian, in Shenzhen, in around 15 minutes, on a schedule of around fifty daily trains between 7:01 a.m. and 11:00 p.m. Immigration checks for both territories are grouped at the departure station.
06Can you visit both Hong Kong electronics shows on the same trip?
Yes, the calendars generally overlap during the October fortnight, but the two venues are far apart: Wan Chai for the HKTDC, AsiaWorld-Expo near the airport for Global Sources. Plan one day per venue rather than a rushed visit to both on the same day.
07Is entry to the Hong Kong electronics shows paid?
Free online pre-registration for a trade visitor is standard practice at both shows: Global Sources sets a minimum age of eighteen and recommends business cards. Confirm the exact fee, if any, on the registration page of the edition you're attending.